Sino-German Workshopon Circular Economy of TRENT
(Transnational Competence Center for Environmental Technology and Research Jiangsu Baden-Württemberg)
Invitation
碳達項目(江蘇省-巴符州環境技術和研究跨國能力中心)
碳達項目中德循環經濟研討會
邀請函
Under the premise that carbon emissions have become a key strategic issue of global concern, China has proposed a national plan of 30-60 dual carbon targets. In the October 2021, the State Council of China officially released the carbon peak and carbon neutral work plan. Among them, the economic system of green and low-carbon circular development is an important development goal. Germany is continually supporting the development of green and low-carbon circular economy. In between, Baden-Württemberg is vigorously promoting the R&D of green technologies for circular economy.
Karlsruhe Institute of Technology (KIT) together with Umwelttechnik BW, the State Agency for Environmental Technology and Resource Efficiency Baden-Württemberg (UTBW), have started the Transnational Competence Center for Environmental Technology and Research Jiangsu Baden-Württemberg (TRENT).This project is funded by the Ministry of the Environment, Climate Protection and Energy Sector of Baden-Württemberg. In addition, the office of Baden-Württemberg International in Nanjing (BW_i Nanjing) and Global Advanced Manufacturing Institute (GAMI) in Suzhou are vigorously supporting the preparation of the center in Jiangsu.
TRENT aims to permanently, systematically and structurally bundle existing competences and technologies in environmental sciences from Jiangsu and Baden-Württemberg and provide a platform for exchange and communication between universities and research institutions, public authorities and private enterprises in these two regions. Therefore, TRENT will hold a series of events to promote exchanges and collaboration of mutual interest.
At present, in the field of circular economy,whether in terms of scientific research results or industrial production, the world is in the stage of exploration and early development. The recycling and reuse of plastic waste, the harmless treatment and utilization of used batteries, the system design of green buildings, the use of renewable energy and the upgrading and transformation of the energy system, etc, are all environmental challenges and require international cooperation. Baden-Württemberg and Jiangsu Province, as sister provinces and states partners for more than 30 years, have been working together on sustainable economic development. In order to promote more exchanges and cooperation between Jiangsu Province and Baden-Württemberg in the field of circular economy, TRENT team is planning this workshop. We will invite experts from industrial production processes to come together to discuss the possible future development of green and low-carbon concepts and technologies in the economic field, as well as potential cooperation directions between Germany and China.
Here, we sincerely invite you to participate in the Sino-German Green Low-Carbon Circular Economy Webinar on Friday, November26, 2021, 8:00-11:00 (Germany)/15:00-18:00 (China). This event is jointly organized by TRENT and Jiangsu Low Carbon Development Project of DeutscheGesellschaft für Internationale Zusammenarbeit (GIZ) GmbH and the Jiangsu Industrial Technology Research Institute (JITRI). The specific schedule is as follows, please stay tuned for more information.
If you are interested in attending the event, please send an email with your contact details to [email protected] by November 24, 2021. The link to the event will be sent to you after your registration. The online participationis free of charge. We are looking forward to your participation!
在碳排放已然成為全球關注的重點戰略問題的前提下,，中國提出了3060的宏偉國家計劃,。在剛剛過去的10月份,，中國國務院正式發布了碳達峰碳中和工作方案,，其中,，綠色低碳循環發展的經濟體系是重要的發展目標,。德國是最早支持并在持續開發綠色低碳發展的國家之一,，其中巴登符騰堡州更是大力推廣循環經濟的綠色環保技術的研發和應用。
在德國巴登符騰堡州環境,、氣候和能源部的支持下,，卡爾斯魯厄理工學院（KIT）攜巴登符騰堡州環境技術和資源效率局（UTBW）共同籌建了江蘇省-巴符州環境技術和研究跨國能力中心項目（簡稱碳達TRENT）。此外,，德國巴符州國際經濟和科技合作協會南京代表處與GAMI全球先進制造研究所也在江蘇省內大力支持中心的籌建工作,。碳達項目將有效地整合江蘇省和巴登符騰堡州環境科學領域的現有能力和技術，為兩省州的高校,、科研院所,、公共部門和企業提供一個交流與溝通的平臺。為此,，碳達項目將舉辦一系列活動來促進雙方在共同感興趣領域的交流與合作,。
目前，在綠色低碳循環經濟發展領域,，無論是在科研成果,，還是工業生產方面，全球都處于探索和早期發展階段,。塑料廢棄物的回收再利用,，廢舊電池的無害處理利用,，綠色建筑的系統設計，以及可再生能源的使用以及并入能源體系的升級改造過程,，這些作為人類共同面對的環境挑戰,，需要國際間的合作來共同解決。巴符州和江蘇省作為30年友好省州伙伴,，一直在經濟的可持續發展方面攜手合作,。為促進江蘇省和巴登符騰堡州在綠色低碳循環經濟領域更多的交流與合作，TRENT團隊籌劃本次研討會,，邀請來自工業生產過程的專家相聚在一起,，共同探討中德在循環經濟的領域里可能的綠色低碳的概念和技術的未來發展，以及潛在的合作方向,。
在此,，我們誠摯地邀請您參加于2021年11月26日星期五8:00-11:00（德國）/15:00-18:00（中國）舉行的中德綠色低碳循環經濟網絡研討會。本次活動由碳達項目攜手德國國際合作機構旗下的江蘇省低碳項目以及江蘇省產業研究院共同組織,。具體日程安排如下,，更多信息請繼續關注。
如果您有意向參加此次活動,，請將您的聯系方式（姓名,、單位、職務,、郵箱及電話）發送至[email protected],。報名截止日期為2021年11月24日?；顒拥逆溄訉⒃谀院蟀l(fā)送給您,。本次在線活動不收取任何參會費用。
我們期待您的參與,！
時間：2021年11月26日星期五,， 德國時間早上08：00- 11：00 / 北京時間15：00-18：00
Language: Bilingual (中英交傳)
FREE of charge 免費
| CET/CST | Agenda |
8:00 a.m.- 08:10 a.m. 03:00 p.m.- 03:10 p.m. | Welcome and introduction of TRENT– Lucas Bretz General manager | GAMI (Global Advanced Manufacturing Institute) 歡迎詞&碳達項目介紹 - Lucas Bretz先生 GAMI全球先進制造研究所總經理 |
Moderation by Prof. Dr. FrankSchultmann | Institute for Industrial Production, KIT 主持人：Frank Schultmann教授| 德國KIT工業生產研究所所長 | |
08:10 a.m.- 08:25 a.m. 03:10 p.m.- 03:25 p.m. | Circular economy and urban-industrial symbiosis – Prof. Dr.Frank Schultmann Director,Institutefor Industrial Production - Chair of Business Administration, Production and Operations Management | KIT 循環經濟與城市工業共生– FrankSchultmann教授 KIT工業生產研究所所長 - 工商管理、生產和運營管理系主任 |
08:25 a.m.- 08:40 a.m. 03:25 p.m.- 03:40 p.m. | The status and challenges of circular economy in China– Kai ZHAO Executive Vice President | China Association of Circular Economy 中國循環經濟發展的現狀與挑戰–趙凱 中國循環經濟協會常務副會長 |
08:40 a.m.- 08:55 a.m. 03:40 p.m.- 03:55 p.m. | End-of-life strategies for electric vehicle batteries – Dr. Simon Gl?ser-Chahoud Team Leader, research group Sustainable value chains | KIT電動汽車電池的使用周期戰略 – Simon Gl?ser-Chahoud博士 KIT工業生產研究可持續價值鏈研究組組長 |
08:55 a.m.- 09:10 a.m. 03:55 p.m.- 04:10 p.m. | Informatization process of circular economy development under the background of double carbon – Bin SUN Co-founder, Jiangsu Liangshan Circular Economy Industry Development Co., Ltd. 雙碳背景下循環經濟發展的信息化進程–孫賓 江蘇兩山循環經濟產業發展有限公司聯合創始人 |
09:10 a.m.- 09:25 a.m. 04:10 p.m.- 04:25 p.m. | Plastic recycling (t.b.c) – Christoph Stallkamp Research assistant in field of circular economy, Institute for Industrial Production | KIT 塑料回收 (待確認) – Christoph Stallkamp KIT工業生產研究所循環經濟領域研究助理 |
| 09:25 a.m.- 09:35 a.m. 04:25 p.m.- 04:35 p.m. | CoffeeBreak 茶歇 |
09:35 a.m.- 09:50 a.m. 04:35 p.m.- 04:50p.m. | Green Ecological Development of Industrial Parks in Jiangsu (t.b.c.)– Qiying HU Project Management Director | Jiangsu Low Carbon Development Project 江蘇工業園區升級改造(待確認)–胡其穎女士 德國國際合作機構江蘇省辦公室項目管理主任 |
09:50 a.m.- 10:05 a.m. 04:50 p.m.- 05:05 p.m. | Upgrading of industrial parks (t.b.c) – Michael Hertwig Senior Scientist | Institut fürArbeitswirtschaft und Organisation IAO Team Digital Engineering Fraunhofer 工業園區的升級 (待確認) – Michael Hertwig先生 弗勞恩霍夫協會勞動管理與組織研究所IAO數字工程團隊資深科學家 |
10:05 a.m.- 10:20 a.m. 05:05 p.m.- 05:20 p.m. | Green Building– Dr.-Ing. Shou-Kong CHEN Guest Researcher of International Research Center for Green Buildings, Soochow University綠色建筑–陳守恭博士 蘇州大學綠色建筑國際研究中心客座研究員 |
10:20 a.m.- 10:35 a.m. 05:20 p.m.- 05:35 p.m. | Urban sustainability (t.b.c) – Dr. Rebekka Volk Team Leader, Head of research group Project and resource management in the built environment | KIT 城市可持續發展 (待確認) – Rebekka Volk 博士 KIT工業生產研究院“建筑環境中的項目和資源管理”研究組組長 |
| 10:35 a.m.- 10:55 a.m. 05:35 p.m.- 05:55 p.m. | Discussion on future joint activities in the field of circular economy in Germany and China (guiding questions will be added) 討論：德國與中國未來在循環經濟領域的合作 (將添加指導性問題) |
| 10:55 a.m.- 11:00 a.m. 05:55 p.m.- 06:00 p.m. | Wrap-up & End of meeting 總結 & 會議結 |
How to apply: If you are interestedin attending the event, please send an email with your contact details to [email protected] by November 24, 2021. The link to the event will be sent to you after your registration. The online participation is free of charge. We are looking forward to your participation!
如果您有意向參加此次活動,，請將您的聯系方式（姓名,、單位、職務,、郵箱及電話）發送至[email protected],。報名截止日期為2021年11月24日?；顒拥逆溄訉⒃谀院蟀l(fā)送給您,。本次在線活動不收取任何參會費用。
Tel: 0512/62967355
Deadline: 2021.11.24
GAMI背景
GAMI - the Global Advanced Manufacturing Institute was established in China in 2008 by wbk Institute of Production Science of the Karlsruhe Institute of Technology (KIT). KIT is one of the first technical universities in Germany and has since become a high-quality education and research institute. It is especially strong in natural sciences and engineering – even on an international scale.
With our university background we can provide our partners with advanced methods and concepts to reach operational excellence. Our goal is to deliver individual strategies and smart solutions in Production Management, Supply Chain Management, Quality Management, Logistics Management as well as Smart Manufacturing in order to create a long-term and sustainable benefit for our clients by means of research, consulting programs and training topics. Meantime, our Smart Manufacturing Labs serve as high-level learning factory and training facilities as well as incubator for Sino-German innovation programs related to Smart Manufacturing.